Memory Bandwidth & Channel Calculator
Calculate peak memory bandwidth and capacity from sockets, populated channels, transfer rate and DIMM population — and how much bandwidth each core gets, the figure that limits many simulation codes.
Results
- Peak memory bandwidth
- 921.6 GB/stheoretical
- Bandwidth per core
- 4.8 GB/stheoretical
- Installed capacity
- 1,536 GBcalculated
- DIMMs installed
- 24calculated
What it calculates
- Peak memory bandwidth
- Bandwidth per core
- Installed capacity
- Channel population balance
Worked example
Using the default inputs below; change any input above to recalculate.
| Sockets | 2 |
|---|---|
| Channels per socket | 12 |
| Populated channels per socket | 12 |
| Memory speed | 4800 MT/s |
| DIMMs per populated channel | 1 |
| DIMM size | 64 GB |
| Cores per socket | 96 |
| Peak memory bandwidth | 921.6 GB/s | theoretical |
|---|---|---|
| Bandwidth per core | 4.8 GB/s | theoretical |
| Installed capacity | 1,536 GB | calculated |
| DIMMs installed | 24 | calculated |
Methodology
Each DDR channel transfers 8 bytes (64 bits) per transfer. Peak bandwidth = sockets × populated channels × MT/s × 8 bytes. Sustained STREAM-type bandwidth is typically a substantial but lower fraction of this peak.
Formulas
- Bandwidth
- BW = sockets × channels × MT/s × 8 B
- Capacity
- C = sockets × channels × DPC × DIMM_size
Assumptions
- DDR4/DDR5 64-bit data width per channel (DDR5's two 32-bit sub-channels together).
Limitations
- Does not model NUMA effects or memory-controller efficiency.