Scientific Simulation & Completion-Time Calculator
Estimate how long a simulation takes and how much memory it needs from its size (cells or particles), time steps, work per cell per step and the sustained throughput of your nodes — or scale a measured baseline.
Results
- Total work
- 1.00e+15 FLOPscalculated
- Wall-clock time
- 6.5 minestimated
- Memory required
- 69.85 GiBcalculated
- Memory per node
- 8.73 GiBcalculated
What it calculates
- Total floating-point work
- Wall-clock time
- Memory required
- Memory per node
Worked example
Using the default inputs below; change any input above to recalculate.
| Cells / particles | 50 million |
|---|---|
| Time steps / iterations | 10000 |
| Work per cell per step | 2000 FLOPs |
| Sustained throughput per node | 400 GFLOPS |
| Nodes | 8 |
| Parallel efficiency | 80 % |
| Memory per cell | 1500 bytes |
| Total work | 1.00e+15 FLOPs | calculated |
|---|---|---|
| Wall-clock time | 6.5 min | estimated |
| Memory required | 69.85 GiB | calculated |
| Memory per node | 8.73 GiB | calculated |
Methodology
Total work = cells × steps × FLOPs per cell per step. Time = work ÷ (nodes × sustained throughput × parallel efficiency). Memory = cells × bytes per cell, divided across nodes for domain-decomposed solvers.
Formulas
- Time
- T = (cells × steps × FLOPs_cell) ÷ (nodes × R_sustained × E)
Assumptions
- Uniform work per cell and per step.
- Domain decomposition divides memory evenly.
Limitations
- I/O and checkpoint time are excluded.
- Adaptive meshes and implicit solvers vary per step.